995Reversible Plow
• Moldboard frame pivots with the bottoms
• Plastic moldboard and steel shins
• Landsides with wedges
• Front gauge wheels
Overview
995 Reversible Plow
John Deere 975/995 Reversible Plows give you some definite advantages, both in the field and on your bottom line. The pivoting design lets you reverse the moldboards to make right- and left-hand-side passes to finish plowing faster.
Features
Expand All
Collapse All
Key Features
V-style mainframe distributes weight for good penetration
995 mainframe
-
The V-style mainframe of the 995 Moldboard Plow distributes weight for good penetration.
The mainframe is made of high-strength 178-mm x 102-mm (7-in. x 4-in.) tubing that is 8-mm (5/16-in.) thick to handle the stress of high-horsepower tractors working in tough ground conditions.
Integral on-land hitch provides excellent maneuverability
Integral on-land hitch
-
The integral hitch gives unexcelled maneuverability in turns and when parking in tight areas:
- Category 3/3N Quik-Coupler compatible
- Tractor rockshaft lever controls the raising and lowering of the plow
- Maximum plowing depth to 356 mm (14 in.)
- Provides ample clearance between the tractor tires and the plow
Rear gauge wheels come in standard equipment
995 Moldboard Plow rear gauge wheels
-
Two front and one rear gauge wheels are standard equipment on the 995 Moldboard Plow:
- Equipped with 6.70-15 tires for good flotation
- Easy turnbuckle adjustment on rear gauge wheel
- Adjustable front gauge wheels limit the plowing depth to 356 mm (14 in.)
Moldboard frame pivots with the bottoms
Moldboard frame
All 995 Moldboard Plows use only one set of bottoms.
The moldboards are reversed laterally by a hydraulic cylinder that is standard equipment. There are several advantages of this design over traditional two-way roll-over plows with two sets of bottoms:
- Requires less 3-point hitch capacity
- Requires less ballasting of the tractor front end
- Eliminates initial cost and service requirements for one complete set of standards and bottoms
Adjust front gauge wheels to limit plowing depth
Front gauge wheels
The front gauge wheels can be adjusted to limit the plowing depth to 356 mm (14 in.). They come equipped with 6.70-15 tires.
Specifications
| Specifications | ||||
|---|---|---|---|---|
| John Deere 995 Reversible Plow |
Hitch
| Type | Category 3N or 3 | |||
|---|---|---|---|---|
| Steering | Integral, in-furrow NoIntegral, on-land YesSemi-integral, on-land NoDrawn, in-furrow NoDrawn, on-land NoQuick-coupler compatible Yes | |||
| Reversible | Type of reversing Hydraulic cylinder Yes |
No. of bottoms
| Option 1 | 5 | |||
|---|---|---|---|---|
| Option 2 | 6 | |||
| Option 3 | 7 | |||
| Option 4 | 8 |
Total width of cut
| Option 1 | 7, 6 ft, in. 2.3 m | |||
|---|---|---|---|---|
| Option 2 | 9 ft 2.7 m | |||
| Option 3 | 10, 6 ft, in. 3.2 m | |||
| Option 4 | 12 ft 3.7 m |
Weight (approximate)
| Option 1 | 3,700 lb 1678 kg | |||
|---|---|---|---|---|
| Option 2 | 4,100 lb 1860 kg | |||
| Option 3 | 4,500 lb 2041 kg | |||
| Option 4 | 5,368 lb 2440 kg |
Clearances
| Vertical | 32 in. 813 mm |
|---|
Standards
| Shearbolt | Standard | |||
|---|---|---|---|---|
| Safety trip | Optional | |||
| Spring reset | No | |||
| Hydraulic | No |
Bottoms
| Option 1 | Plowing depth 14 in. 350 mm Steel moldboard | |||
|---|---|---|---|---|
| Option 2 | Plastic moldboard |
Frame
| Option 1 | 6x4-in. x 3/16-in. thick for 2 or 3-bottoms | |||
|---|---|---|---|---|
| Option 2 | 6x4-in. x 3/16-in. thick for 2 or 3-bottoms |
Horsepower required
| Option 1 | 5-bottom: 130-165 hp | |||
|---|---|---|---|---|
| 6-bottom: 150-175 hp | 3-bottom: 70-95 hp | |||
| Option 3 | 7-bottom: 175-200 hp | |||
| Option 4 | 8-bottom: 200-250 hp |
Maintenance and Support
YOU MAY ALSO BE INTERESTED IN...
Product modules and features has been compiled for worldwide circulation with general information, pictures, and descriptions of features not available in all countries. In some countries, products and accessories may require modifications or additions to ensure compliance with local regulations. Contact your local John Deere dealer for details.