975Reversible Plow
• Moldboard frame pivots with the bottoms
• Safety-trip standards available to save time
• Plastic moldboard and steel shins
• Rear gauge wheel
Overview
975/995 Reversible Plows: Less maintenance, faster plowing
The in-furrow 975 Plow, available with 3, 4, or 5 bottoms, is ideal for small- to medium-sized tractors. The on-land 995 Plow, in 5, 6, or 7 bottoms, gives you maximum productivity from larger-horsepower tractors.
Features
Expand All
Collapse All
Key Features
Easily maneuver tight turns with integral in-furrow hitch
Integral in-furrow hitch
Compatible with tractors equipped with Quik-Coupler, the integral hitch offers unexcelled maneuverability in turns and when parking in tight areas:
- Tractor rockshaft lever controls the raising and lowering of the plow
- Maximum plowing depth is 356 mm (14 in.)
Moldboard frame pivots with the bottoms
975 mainframe
All 975 Moldboard Plows use only one set of bottoms.
The moldboards are reversed laterally by a hydraulic cylinder that is standard equipment. There are several advantages of this design over traditional two-way rollover plows with two sets of bottoms:
- Requires less 3-point hitch capacity
- Requires less ballasting of the tractor front end
- Eliminates initial cost and service requirements for one complete set of standards and bottoms
Reversing pin
The reversing pin is positioned at a 13.5-degree angle, instead of being straight up, for even plowing in both directions. The reversing pin does not require adjustments by the operator.
Strong mainframe handles tough plowing jobs
The V-style mainframe is made of 152-mm x 102-mm (6-in. x 4-in.) welded tubular steel to handle the stress of tough plowing and reversing action as well as tight turns:
- 5-mm (3/16-in.) thick on three-bottom plows
- 8-mm (5/16-in.) thick on four- and five-bottom plows
Adjustable width of cut improves residue-handling ability
Adjustable width of cut
The width of cut on all 975 Moldboard Plows can be set at 406 mm or 457 mm (16 in. or 18 in.) by moving the standards to different bolt holes in order to:
- Match the tractor horsepower to the soil conditions
- Improve the residue-handling ability
- Improve productivity
- Maximize fuel efficiency
The underframe clearance is 813 mm (32 in.) to allow excellent material flow through the plow.
Adjustable rear gauge wheel comes in standard equipment
975 Moldboard Plow rear gauge wheel
All 975 Moldboard Plows come with a rear gauge wheel included in standard equipment. The rear gauge wheel provides the following features:
- Controls the plowing depth of the rear of the plow in rolling terrain
- Stabilizes rear of the plow in soft soils
- Adjustable through a full range of plowing depths
- Designed for easy turnbuckle adjustment
- Equipped with 6.70-15 tire to eliminate bulldozing in soft soils
Specifications
| Specifications | ||||
|---|---|---|---|---|
| John Deere 975 Reversible Plow |
Hitch
| Type | Category 3N, 3, or 2 | |||
|---|---|---|---|---|
| Steering | Integral, in-furrow YesIntegral, on-land NoSemi-integral, on-land NoDrawn, in-furrow NoDrawn, on-land NoQuick-coupler compatible Yes | |||
| Reversible | Type of reversing Hydraulic cylinder Yes |
No. of bottoms
| Option 1 | 2 | |||
|---|---|---|---|---|
| Option 2 | 3 | |||
| Option 3 | 4 | |||
| Option 4 | 5 |
Total width of cut
| Adjustment | Manual | |||
|---|---|---|---|---|
| Option 1 | Range -- 2, 8 to 3, 0 ft, in. .63 to .91 m | |||
| Option 2 | 4, 0 to 4, 5 ft, in. 1.2 to 1.4 m | |||
| Option 3 | 5, 3 to 6, 0 ft, in. 1.6 to 1.8 mm | |||
| Option 4 | 6, 6 to 7, 5 ft, in. 2.0 to 2.3 m |
Weight (approximate)
| Option 1 | 900 lb 408 kg | |||
|---|---|---|---|---|
| Option 2 | 1,200 lb 544 kg | |||
| Option 3 | 1,700 lb 771 kg | |||
| Option 4 | 2,300 lb 1043 kg |
Clearances
| Vertical | 32 in. 813 mm |
|---|
Standards
| Shearbolt | Standard | |||
|---|---|---|---|---|
| Safety trip | Optional | |||
| Spring reset | No | |||
| Hydraulic | No |
Bottoms
| Option 1 | Plowing depth 14 in. 350 mm Steel moldboard | |||
|---|---|---|---|---|
| Option 2 | Plastic moldboard |
Frame
| Option 1 | 6x4-in. x 3/16-in. thick for 2 or 3-bottoms | |||
|---|---|---|---|---|
| Option 2 | 6x4-in. x 4/16-in. thick for 4 or 5-bottoms |
Horsepower required
| Option 1 | 2-bottom: 50-70 hp | |||
|---|---|---|---|---|
| Option 2 | 3-bottom: 70-95 hp | |||
| Option 3 | 4-bottom: 95-140 hp | |||
| Option 4 | 5-bottom: 130-165 hp |
Maintenance and Support
YOU MAY ALSO BE INTERESTED IN...
Product modules and features has been compiled for worldwide circulation with general information, pictures, and descriptions of features not available in all countries. In some countries, products and accessories may require modifications or additions to ensure compliance with local regulations. Contact your local John Deere dealer for details.