Z925M EFI Flex FuelZTrak™ Zero-Turn Mower
- 7-Iron™ PRO deck
- Flex Fuel capable (E85)
- Electronic fuel injection
Specifications | ||||
---|---|---|---|---|
John Deere Z925M EFI Flex Fuel ZTrak™ Zero-Turn Mower |
Model No. | FCV740 | |||
---|---|---|---|---|
Horsepower (gross) | At 3,600 rpm, 25 hp 18.6 kW |
|||
Displacement | 45.6 cu in. 747 cc |
|||
Cylinders | Two | |||
Crankcase capacity | With filter, 2 U.S. qt 1.9 L |
|||
Oil filter | Full flow, replaceable | |||
Lubrication | Full pressure | |||
Cooling | Air | |||
Air cleaner | Pre-cleaner Yes Heavy-duty canister type with safety element |
Fuel type | Gasoline or ethanol blends up to E85 | |||
---|---|---|---|---|
Fuel consumption | Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal. 4.2-7.2 L/hr |
|||
Fuel tank capacity | 11.5 U.S. gal. 43.5 L |
|||
Fuel tank switch/shut-off valve\ | Yes |
Charge system | 20 amp | |||
---|---|---|---|---|
Battery voltage | 12 V | |||
Cold cranking amp | 300 amp | |||
Hour meter | Standard, digital | |||
Operator presence starting system | Brake-N-Go (hand) |
Wheel motors | Tuff Torq heavy-duty integrated piston wheel motor | |||
---|---|---|---|---|
Travel speed | Forward 0-10 mph 0-16.1 km/hReverse 0-4.5 mph 0-7.2 km/h |
|||
Speed and direction control\ | Twin levers | |||
Hydraulic capacity | 5.9 U.S. qt 5.6 L |
|||
Filter | Internal, replaceable |
Drive tires\ | 24x12-12 (54 in., 60 in.) | |||
---|---|---|---|---|
Load rating | 4 PR |
Dynamic braking | Twin levers | |||
---|---|---|---|---|
Park brake | Internal wet disk integrated in the transmission | |||
Park brake actuation | Hand brake |
Type | Electro-magnetic, 225 lb-ft 305 Nm |
|||
---|---|---|---|---|
Drive | V-belt |
Available widths | 54, 60 in. 137, 152 cm |
|||
---|---|---|---|---|
Deck construction | 7-Iron PRO, one-piece stamped steel with reinforcements | |||
Deck thickness | 7 gauge 0.18 in. 4.6 mm |
|||
Discharge | Side, MOD | |||
Height-of-cut range | Increments 0.25 in. 0.64 cm 1-5.5 in. 2.54-14 cm |
|||
Cutting width | 54, 60 in. 137, 152 cm |
Length | Varies by deck size | |||
---|---|---|---|---|
Thickness | 0.25 in. 0.64 cm |
|||
Tip speed | Approximately 18,000 fpm 5,486 m/min |
|||
Number | Three |
Caster wheel type | Flat free | |||
---|---|---|---|---|
Caster wheel size | 13x6.5-6 | |||
Front anti-scalp rollers | RH, center, LH | |||
Rear anti-scalp rollers | Optional |
Length | 84 in. 213 cm |
|||
---|---|---|---|---|
Width | With chute down, 68, 74 in. 173, 188 cm |
|||
Height | With ROPS up, 73 in. 185 cm With ROPS down, 47 in. 119 cm |
|||
Weight | 1,198 to 1,291 lb 543 to 586 kg |
Date collected | 24-Apr-2017 |
---|
Product modules and features has been compiled for worldwide circulation with general information, pictures, and descriptions of features not available in all countries. In some countries, products and accessories may require modifications or additions to ensure compliance with local regulations. Contact your local John Deere dealer for details.