D630Draper
- 30 ft. (9.1 m) cut width
- Compatible with W200M, W235M, W235R and W260R
- Hydraulic tilt John Deere cutter bar
- Ground speed matching
- Integrated controls
Features
Expand AllCollapse All
D600 Draper and interchangeable rotary platform
D600 Draper on W235 Windrower
Red circles point out the location of the belt drive motors
Motor driving the left-hand belt
Motor driving the right-hand belt
D600 Draper
D600 Draper on windrower
First pass with right discharge
Second pass with right discharge
Third pass with left discharge
Center discharge
Interchangeable with John Deere rotary platforms
D600 Draper and interchangeable rotary platform
D600 Draper has an interchangeable rotary platform:
- Interchangeable on W200M and R Series units in 30 minutes or less
- Growers can use one traction unit for harvesting both small grains and hay
Higher productivity with center-driven belts
Center-driven belts
D600 Draper on W235 Windrower
- Deliver increased torque
- Enable greater productivity with minimal belt slippage
- Increase performance in heavy crop conditions
Red circles point out the location of the belt drive motors
- Draper belts on the D600 are driven from the center of the platform
- Delivers increased belt performance compared to drapers with end-driven belts
Belt drive motors
Motor driving the left-hand belt
Motor driving the right-hand belt
Due to the motors pulling the belt (instead of pushing in an end drive system), there is less slack in the belt. This delivers an increase in belt torque.
As a result, producers experience minimal belt slippage and increased performance in heavy crop conditions due to the center-driven belt system.
Strong, positive-feeding reel handles all crop conditions
D600 Draper
The D600 Series includes an improved reel that increases durability in heavy crop conditions. The dual drive offers more versatility for operators to match their crop conditions and offers more reel torque for heavy crop conditions. The system can be quickly reconfigured by changing quick couplers to offer a series configuration for a higher reel speed to meet the needs of lighter crop conditions.
The cam reel allows the reel to efficiently lift crop across the cutterbar and release it onto the draper belts.
D600 Draper teeth
- Easy reel tooth replacement is done with a 90-degree turn using a wrench. It allows the reel tooth to be removed and replaced.
- Additional teeth can be added at any location along the extruded tooth bar.
Draper hydraulic pump control logic delivers constant header speed
D600 Draper on windrower
The draper hydraulic pump control adjusts knife, belt, and reel speeds to match the ground speed. This provides consistent feeding as you move through the field.
Hydraulic deck shift (double swath package)
John Deere D625, D630, and D636 Drapers can windrow out of the center, right, or left ends of the draper with the press of a button using the hydraulic shift option (double swath package).
- Larger windrows to match combine or self-propelled forage harvester
- Match narrower-width drapers with higher-capacity harvesting
- Place higher-density windrows in front of harvesters when yields are low
- Discharge two windrows side by side for uniform combine or forage harvester feeding
First pass with right discharge
Second pass with right discharge
Third pass with left discharge
Center discharge
Specifications
| Specifications | ||||
|---|---|---|---|---|
| John Deere D630 Draper |
Key Specs
| Cutterbar - Type | John Deere double-cut knives: 10.2 cm 4 in. |
|||
|---|---|---|---|---|
| Cut width (length) | 7.6 m 25 ft |
|||
| Reel type | Hydraulic | |||
| Fingers | Plastic | |||
| Belt width | V-guided draper belt: 106.7 cm 42 |
|||
| Transport length, hitch extended | 9 m 29.6 ft |
Cutterbar
| Type | John Deere double-cut knives: 10.2 cm 4 in. |
|||
|---|---|---|---|---|
| Cut width (length) | 9.1 m 30 ft |
|||
| Knife drive | Standard: Single motor and knife drive Optional: Two hydraulic motors and two knife drives |
|||
| Knife speed | 520 rpm | |||
| Stroke length | 98 mm 3.9 in. |
|||
| Cutterbar tilt | Hydraulic, adjustable from cab |
Reel
| Reel type | Hydraulic | |||
|---|---|---|---|---|
| Number of bats | Six | |||
| Fingers | Plastic | |||
| Diameter | 1118 mm 44 in. |
|||
| Height control | Hydraulic, adjustable from cab | |||
| Speed control | Multi-function lever, in cab | |||
| Reel lift | Hydraulic, adjustable from cab | |||
| Reel fore and aft | Hydraulic, adjustable from cab |
Draper and decks
| Belt width | V-guided draper belt: 106.7 42 in. |
|||
|---|---|---|---|---|
| Delivery opening width | Delivery, double swath opening: 137.2 cm 54 in. Delivery, single swath opening: 203.2 cm 80 in. |
Auxiliary top auger
| Type | Optional: Factory-installed cross-auger |
|---|
Dimensions
| Operating width (field) | 9.1 m 30 ft |
|||
|---|---|---|---|---|
| Transport width (reel fully retracted) | 2.6 m 8.5 ft |
|||
| Transport height | 2.44 m 29.6 ft |
|||
| Transport length, hitch extended | 10.5 m 34.6 ft |
Weight
| Approximate weight (base platform without reel) | 1232 kg 3513 lb |
|||
|---|---|---|---|---|
| Approximate weight (base platform with reel) | 2710 kg 5975 lb |
Gauge wheels and transportation
| Gauge wheels | Optional: Adjustable castoring gauge wheel | |||
|---|---|---|---|---|
| Integrated slow speed transport system | Self-contained transport, including hitch, jack and axle, is conveniently stored on the swather table |
Maintenance and Support
YOU MAY ALSO BE INTERESTED IN...
Product modules and features has been compiled for worldwide circulation with general information, pictures, and descriptions of features not available in all countries. In some countries, products and accessories may require modifications or additions to ensure compliance with local regulations. Contact your local John Deere dealer for details.